DIY Lapidary Carving Station
Pan
https://www.amazon.com/dp/B000UBE93S?psc=1&ref=ppx_yo2_dt_b_product_details
Base
https://www.amazon.com/dp/B001CMV1VW?psc=1&ref=ppx_yo2_dt_b_product_details
Feet - You will need wood blocks to elevate feet to allow for pan depth.
https://www.amazon.com/Rubber-Cutting-Stainless-Screws-Electronics/dp/B08PCGXKK9/ref=sr_1_2?crid=2IKP037XVC8E5&keywords=rubber+feet&qid=1644436502&sprefix=rubber+feet%2Caps%2C65&sr=8-2
Light
https://www.amazon.com/Moffatt-95041-Incandescent-Halogen-Coupler/dp/B0089DVYLE/ref=sr_1_40?crid=2C25UQP873M0Z&keywords=moffat+light+24&qid=1644436764&sprefix=moffat+light+24%2Caps%2C48&sr=8-40
Drip Tank - You will need a piece of tubing to extend the water flow.
https://www.ultratec-facet.com/product/drip-tank/
Pump & LocLine — Alternative to drip tank - less expensive
https://www.amazon.com/Rio-Plus-50-Aqua-Pump/dp/B0027J67GS
https://www.amazon.com/Loc-Line-Coolant-Magnetic-Manifold-Piece/dp/B002065OXK/ref=sr_1_3?crid=2E0KK06S4W5GC&keywords=loc+line&qid=1644437292&sprefix=loc+line%2Caps%2C60&sr=8-3
Wooden Hand Rest - Made out of a teak board. There are guides underneath to prevent lateral movement. There are grooves in the top of the hand rest for water drainage.
Plastic Shield
I had the local glass and window shop cut me a piece of thin plexiglass. I built a form and used a heat gun to relax the plexiglass over the form. Read heat gun instructions before operating.
https://www.amazon.com/dp/B000UBE93S?psc=1&ref=ppx_yo2_dt_b_product_details
Base
https://www.amazon.com/dp/B001CMV1VW?psc=1&ref=ppx_yo2_dt_b_product_details
Feet - You will need wood blocks to elevate feet to allow for pan depth.
https://www.amazon.com/Rubber-Cutting-Stainless-Screws-Electronics/dp/B08PCGXKK9/ref=sr_1_2?crid=2IKP037XVC8E5&keywords=rubber+feet&qid=1644436502&sprefix=rubber+feet%2Caps%2C65&sr=8-2
Light
https://www.amazon.com/Moffatt-95041-Incandescent-Halogen-Coupler/dp/B0089DVYLE/ref=sr_1_40?crid=2C25UQP873M0Z&keywords=moffat+light+24&qid=1644436764&sprefix=moffat+light+24%2Caps%2C48&sr=8-40
Drip Tank - You will need a piece of tubing to extend the water flow.
https://www.ultratec-facet.com/product/drip-tank/
Pump & LocLine — Alternative to drip tank - less expensive
https://www.amazon.com/Rio-Plus-50-Aqua-Pump/dp/B0027J67GS
https://www.amazon.com/Loc-Line-Coolant-Magnetic-Manifold-Piece/dp/B002065OXK/ref=sr_1_3?crid=2E0KK06S4W5GC&keywords=loc+line&qid=1644437292&sprefix=loc+line%2Caps%2C60&sr=8-3
Wooden Hand Rest - Made out of a teak board. There are guides underneath to prevent lateral movement. There are grooves in the top of the hand rest for water drainage.
Plastic Shield
I had the local glass and window shop cut me a piece of thin plexiglass. I built a form and used a heat gun to relax the plexiglass over the form. Read heat gun instructions before operating.
